24
Air Spring Removal
Push the shaft half way into the upper tube, then quickly and firmly pull Push the shaft half way into the upper tube, then quickly and firmly pull
the shaft out to dislodge the seal head. the shaft out to dislodge the seal head.
Remove the air spring assembly and seal head spacer from the upper Remove the air spring assembly and seal head spacer from the upper
tube.tube.
NOTICE
Do not scratch the inside of the upper tube. Scratches will allow air
to bypass the seals resulting in reduced spring performance.
Clean the inside and outside of the upper tube.Clean the inside and outside of the upper tube.
Inspect the inside and outside of the upper tube for damage.Inspect the inside and outside of the upper tube for damage.
NOTICE
Scratches on the inside surface of the upper tube can cause air to
leak. If an internal scratch is visible, the crown steerer upper tube
assembly may need to be replaced.
4
ZEB Pike (pictured) and Lyrik
5
RockShox Suspension Cleaner
Dowel Dowel
RockShox Suspension Cleaner
To Next Page
Loading...
