RockShox PIKE - 200 Hour Service Damper Assembly

48
Damper Assembly
200 Hour Service Damper Assembly
Clamp the cartridge tube wrench flats lightly into the vise and soft jaw Clamp the cartridge tube wrench flats lightly into the vise and soft jaw
inserts. Wrap a shop towel around the tube to absorb any oil.inserts. Wrap a shop towel around the tube to absorb any oil.
Pour Maxima PLUSH 3wt suspension oil into the cartridge tube until it Pour Maxima PLUSH 3wt suspension oil into the cartridge tube until it
is full.is full.
Squeeze the bladder until trapped bubbles stop purging. Pour Squeeze the bladder until trapped bubbles stop purging. Pour
additional oil into the cartridge tube until it is full.additional oil into the cartridge tube until it is full.
The rebound damper must be in the full open/fastest rebound setting The rebound damper must be in the full open/fastest rebound setting
before installation.before installation.
Insert the rebound adjuster knob, or 2.5 mm hex wrench, into the Insert the rebound adjuster knob, or 2.5 mm hex wrench, into the
rebound damper shaft until it contacts the rebound adjuster screw. rebound damper shaft until it contacts the rebound adjuster screw.
Turn the knob counter-clockwise until it stops.Turn the knob counter-clockwise until it stops.
Remove the adjuster knob from the shaft.Remove the adjuster knob from the shaft.
1
Maxima PLUSH 3wt Suspension Oil
2