RockShox PIKE - 200 Hour Service Damper Bleed

50
Damper Bleed
200 Hour Service Damper Bleed
Draw Maxima PLUSH 3wt suspension oil into a RockShox Bleed Draw Maxima PLUSH 3wt suspension oil into a RockShox Bleed
Syringe until it is half full.Syringe until it is half full.
Thread the syringe bleed fitting into the seal head bleed port.Thread the syringe bleed fitting into the seal head bleed port.
Depress the plunger to pressurize the damper assembly.Depress the plunger to pressurize the damper assembly.
Push the rebound damper shaft into the cartridge tube while applying Push the rebound damper shaft into the cartridge tube while applying
opposing pressure on the syringe plunger as the syringe fills with oil.opposing pressure on the syringe plunger as the syringe fills with oil.
Pull the rebound damper shaft slowly out of the cartridge tube while Pull the rebound damper shaft slowly out of the cartridge tube while
applying opposing pressure on the syringe plunger as oil fills the applying opposing pressure on the syringe plunger as oil fills the
damper.damper.
Repeat this process until bubbles are no longer pulled from the damper Repeat this process until bubbles are no longer pulled from the damper
into the syringe.into the syringe.
1
Maxima PLUSH 3wt Suspension Oil RockShox Bleed Syringe
2
3