RockShox PIKE - Air Spring Assembly

30
Air Spring Assembly
Air Spring Assembly
Install a new backup ring (thin, lower) onto the air piston.Install a new backup ring (thin, lower) onto the air piston.
Apply grease to the new quad ring seal and install it onto the air piston Apply grease to the new quad ring seal and install it onto the air piston
above the backup ring.above the backup ring.
Install a new glide ring (thick, upper) tapered end upward, above the Install a new glide ring (thick, upper) tapered end upward, above the
quad ring seal.quad ring seal.
Set the air spring assembly aside on a clean shop towel.Set the air spring assembly aside on a clean shop towel.
Apply a liberal amount of grease to the air spring shaft.Apply a liberal amount of grease to the air spring shaft.
Apply a thin layer of grease to the new top out bumper and Install it Apply a thin layer of grease to the new top out bumper and Install it
onto the air spring shaft.onto the air spring shaft.
1
2
SRAM Butter Grease
3
SRAM Butter Grease