36
Air Spring Installation
Insert the air seal head into the upper tube and firmly press it into the Insert the air seal head into the upper tube and firmly press it into the
upper tube until it stops.upper tube until it stops.
Apply grease to a new seal head spacer o-ring and install it onto the Apply grease to a new seal head spacer o-ring and install it onto the
seal head spacer.seal head spacer.
Insert the seal head spacer into the upper tube, o-ring end first, and Insert the seal head spacer into the upper tube, o-ring end first, and
seat it into the upper tube step until it stops.seat it into the upper tube step until it stops.
4
5
To Next Page
Loading...
