Rockwell Automation 2711C-F2M User Manual

44 Publication 2711C-UM001C-EN-P - September 2009
Chapter 2 Configuration Mode
Follow these steps to set the IP address for the Ethernet port of the
connected terminal from the C600 and C1000 terminals.
1. Click Communication from the menu list.
2. Click Ethernet Settings from the communication screen.
3. Click Set Static IP Address.
The Static IP Address screen appears.

Rockwell Automation 2711C-F2M Specifications

General

Brand	Rockwell Automation
Model	2711C-F2M
Category	Touch terminals
Language	English