To Next PageTo Next Page
Need help?Do you have a question about the Rockwell Automation 5094-OB32XT and is the answer not in the manual?
General| Manufacturer | Rockwell Automation |
|---|---|
| Product Type | Digital Output Module |
| Series | 5094 |
| Number of Outputs | 32 |
| Output Type | Sourcing |
| Voltage Rating | 24V DC |
| Communication Interface | EtherNet/IP |
| Module Location | Chassis |
| Operating Temperature | -20°C to 60°C |
| Certifications | CE, UL |
Requirements for using FLEX 5000 modules with Logix 5000 controllers and software.
Creating a Logix Designer project for FLEX 5000 modules.
Additional items to be aware of for FLEX 5000 safety I/O modules.
Precautions for the proper use of FLEX 5000 I/O safety modules.
Defines the safe states for safety modules (outputs OFF, input data OFF).
Understanding configuration signature and ownership for safety modules.
Clearing configuration ownership before installing on a safety network.
Configuring FLEX 5000 output module behavior when a connection fault occurs.
Overriding data with a force to test logic or maintain operations during device failure.
Features available on FLEX 5000 I/O safety input modules.
Safety application suitability levels for specific safety input/output modules.
Features available on FLEX 5000 safety relay output modules.
Procedures for replacing safety modules in a CIP Safety network.
Using Logix Designer for troubleshooting module faults.
Wiring diagrams for safety input modules in Safety/Pulse modes.
Wiring diagrams for safety output modules in Safety/Pulse modes.
Wiring diagrams for safety relay output modules.
