104 Rockwell Automation Publication 5094-UM001E-EN-P - April 2020
Chapter 6 Configure the Standard Module
Edit 5094-OB8/5094-OB16/
5094-OB32 Module
Configuration Categories
In addition to the General, Connection, and Module Info categories, the Points
category is available when you configure a 5094-OB8, 5094-OB8XT,
5094-OB16, 5094-OB16XT, 5094-OB32, or 5094-OB32XT module.
Points Category
The Points category shows the configuration options available for each point.
You can configure the following parameters from the Points category:
• Output State During Program Mode
• Output State During Fault Mode
• Fault Mode Output State Duration
• Fault Mode Output State Final State
• Output State When Communications Fail in Program Mode
•Enable No Load Diagnostics
IMPORTANT If you use the Listen Only Data connection type, the Points Category does
not appear.
To Next Page
Loading...
