Rockwell Automation Allen-Bradley 1715-OB8DE - Page 106

106 Rockwell Automation Publication 1715-UM001J-EN-P - December 2020
Chapter 2 Installation Instructions
IMPORTANT
• The adapter must be physically connected to the network running
the BOOTP server.
• Multiple MAC address requests are received. The lowest MAC
addresses correspond to the leftmost adapter slot, or primary
adapter. Do not assign an IP address to the higher MAC address
requests, as these addresses correspond to the rightmost
adapter slot, or secondary module.
• We recommend that you manually enter the MAC address.
Sometimes the settings of your personal computer can prevent
you from obtaining MAC address requests from your BOOTP/DHCP
server. Please check the documentation for your BOOTP/DHCP
server for more help. Refer to Knowledge Base article 32648
for
more details.
https://rockwellautomation.custhelp.com/app/answers/detail/
a_id/32648
• The MAC address is found on the label on the front of the adapter
backplane. The top MAC address corresponds to the primary
adapter in the leftmost slot.
32060-M
00:A0:EC:00:24:8C
00:A0:EC:00:24:91
Top MAC Address