194 Rockwell Automation Publication 1715-UM001J-EN-P - December 2020
Chapter 6 Configure the Redundant I/O System
2. Expand the Analog module list, select the 1715-OF8I module, and click
OK.
The General tab appears.
See page 178
.
3. Click Change.
4. Verify that Redundant is Yes.
See page 190
.
5. Click OK.
6. Click the Connection tab, see page 169
.
7. Click the Module Info A tab, see page 170
.
8. Click the Module Info B tab, see page 171
.
9. Click the Configuration tab.
The Configuration tab appears.
To Next Page
Loading...
