34 Rockwell Automation Publication 1756-UM021A-EN-P - September 2023
Chapter 3 System Manager
Networking In this section, it is possible to choose which networks are reachable when establishing a VPN
through FactoryTalk Remote Access.
VPN
Network interfaces
• WAN: Select this option to be able to reach via VPN the devices on the subnet of the
Eth2 port.
• LAN: Select this option to be able to reach via VPN the devices on the subnet of the Eth1
port.
• Point-to-point virtual Ethernet adapter: Select this option to be able to reach via VPN
the device only.
• Reserve static IP pool for VPN connections: By enabling this option, it becomes possible
to define one or more IP pools that are used to dynamically assign the IP address to the
remote PC where the FactoryTalk Remote Access tools are running.
FT Remote Access Options for connecting the device to a FactoryTalk Remote Access organization.
Connection
The Connect/Disconnect button lets you manage the connection/disconnection of the device
to/from the FactoryTalk Remote Access Network. By pressing Connect, if the device has never
been registered to a FactoryTalk Remote Access domain, the ID and Password will appear to be
used for the registration.
The only way to unregister a device from its FactoryTalk Remote Access organization is to
delete the device from the FactoryTalk Remote Access manager. Then the ID and Password will
reappear to be used for a new registration.
To Next Page
Loading...
Need help?
General
