Rockwell Automation Publication 1756-UM021A-EN-P - September 2023 35
Chapter 3 System Manager
Configuration
This section outlines the configuration parameters that are required for establishing a
connection to a FactoryTalk Remote Access organization.
Availability mode
Always on: Keeps a non-stop link with FactoryTalk Remote Access services.
Reconnect to server on reboot if left connected: If turned on, this option reconnects to the
server automatically after restarting the device, if it was connected before.
Connection port
Select the appropriate port for connecting to the FactoryTalk Remote Access organization's
servers. The available options include Auto (automatic selection), 80, 443, or 5935.
Server
Determine whether the FactoryTalk Remote Access Network to which the device should
connect is Public or Private. Public means that the device will be connected to the network
infrastructure hosted by Rockwell Automation.
Proxy configuration
Configure the connection parameters for the FactoryTalk Remote Access organization if a
proxy is required. The available options for proxy types are: None (no proxy), SOCKS5, and
HTTP. Choose the option that best aligns with your network requirements and security
policies.
To Next Page
Loading...
Need help?
General
