Rockwell Automation Allen-Bradley Guard master 442G-MAB Series - Page 9

Rockwell Automation Publication 440G-UM001B-EN-P - May 2016 9
General Description Chapter 1
Figure 2 - Handle Assembly
Figure 3 - Escape Release (optional)
IMPORTANT The length of the actuation shaft (115 mm (4.53 in.)) is optimized for
mounting on a 45 mm (1.77 in.) profile. An extended shaft is available 
(442G-MABASHFT). See Chapter 3, Installation and Wiring
on page 15 for
instructions regarding mounting on smaller or larger profiles.
3 mm
(0.12 in.)
Locking Pin for Handle
Adjustment
Bolt Tongue
Guard Door Handle
Roll-out Bolt Locking
Mechanism
Automatically
Extended Bolt Lock
Mechanism
2 x Torx T10
Protective
Sleeve
Setscrew
Handle
Cover
Actuation Shaft
8 x 8 mm
(0.31 x 0.31 in.)