Rockwell Automation Publication 2198-UM001D-EN-P - May 2014 29
Chapter 2
Planning the Kinetix 5500 Drive
System Installation
This chapter describes system installation guidelines used in preparation for
mounting your Kinetix 5500 drive components.
Topic Page
System Design Guidelines 30
Electrical Noise Reduction 36
ATTENTION: Plan the installation of your system so that you can perform all
cutting, drilling, tapping, and welding with the system removed from the
enclosure. Because the system is of the open type construction, be careful to
keep metal debris from falling into it. Metal debris or other foreign matter can
become lodged in the circuitry and result in damage to the components.
To Next Page
Loading...
Need help?
General
