20 Rockwell Automation Publication 750-IN119A-EN-P - April 2022
Chapter 2 Receiving, Handling, and Storage
Figure 4 - Use a Lift Truck to Transport a PowerFlex 755TS Shipping Crate
Overhead Lifting (Crane or Hoist)
All lifting equipment and components (hooks, bolts, lifts, slings, chains, and so
forth) must be properly sized and rated to lift and hold the weight of the
equipment safely. Shipment weights can be found on the packing slip that is
included with each shipment. Approximate weights are listed on page 18
.
Belt the shipping create to
the carriage before lifting
and moving.
Shipping Skid
Carriage and Mast
Lift only from underneath the shipping skid.
Load Backrest
ATTENTION: To guard against possible personal injury and/or equipment
damage:
• Inspect all lifting hardware for proper attachment before lifting the
equipment.
• Do not allow any part of the equipment or lifting mechanism to contact
electrically charged conductors or components.
• Do not subject the equipment to high rates of acceleration or deceleration
while transporting to the installation site or when lifting.
• Do not allow personnel or their limbs directly underneath the equipment when
it is being lifted and mounted.
To Next Page
Loading...
