Rockwell Automation Allen-Bradley PowerFlex 755TS TotalFORCE Control - Page 21

Rockwell Automation Publication 750-IN119A-EN-P - April 2022 21
Chapter 2 Receiving, Handling, and Storage
Attach Lifting Hardware to Frames 6 and 7
Rig the lifting hardware according to the following diagrams.
Figure 5 - Rigging Geometry
Enclosure Code F
Follow these guidelines for drives with enclosure code F.
Figure 6 - Wall Mount Frame 6 Lifting Points – Two Places
Figure 7 - Wall Mount Frame 7 Lifting Points – Four Places
>
1
/
2 A
A
<45°
>
1
/
2 A
A
<45°
Top
Top