Publication 2098-IN005C-EN-P — March 2008
Commissioning Your Ultra3000 Drive 51
11. Turn off input 5.
12. Apply 12…24V dc to input 4 (momentarily again) to restart the
indexing move.
13. Turn off input 4.
14. Apply 12…24V dc to input 7 to pause the indexing move.
15. Remove the 12…24V dc and observe the index move continue.
16. Close the dialogs.
17. Remove the 12…24V dc (Drive Enable) from input 1.
To Next Page
Loading...
