Troubleshooting R&S FSP
1164.4556.82 3.74 E-1
Normal action Error and error cause
If the operating system on the
hard disk has been destroyed
and cannot be loaded correctly,
Windows XP reacts by displaying
a "bluescreen". This bluescreen
contains all essential information
on the internal states of the
computer which are displayed as
follows (by way of example):
Windows XP and the instrument
firmware must then be updated
from the back-up partition (cf.
Chapter 4, Section "Initial Setup/
Update of the Instrument
Firmware").
Subsequent to starting the operation system, the application for the
R&S FSP is loaded in a start-up program. The program start is
initiated automatically and generates a window , which displays
information on the start-up procedure.
To Next Page
Loading...
