Preparing for Use
R&S
®
FSVA3000/R&S
®
FSV3000
14Getting Started 1330.8073.02 ─ 03
● Unpacking and Checking the Instrument........................................................ 14
● Accessory List................................................................................................. 14
● Placing or Mounting the Instrument................................................................ 15
● Connecting the AC Power...............................................................................17
● Switching the Instrument On and Off.............................................................. 17
● Performing a Self-Alignment and a Selftest.................................................... 18
● Checking the Supplied Options.......................................................................19
4.1.1 Unpacking and Checking the Instrument
Check the equipment for completeness using the delivery note and the accessory
lists for the various items. Check the instrument for any damage. If there is dam-
age, immediately contact the carrier who delivered the instrument. Make sure not
to discard the box and packing material.
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped later, you can use the material to protect the control ele-
ments and connectors.
Risk of injury during transportation
The carrying handles at the front and side of the casing are designed to lift
or carry the instrument. Do not apply excessive force to the handles. If a
handle is ripped off, the falling instrument can cause injury.
Be aware of the weight of the instrument when lifting it. Observe the infor-
mation on transporting heavy instruments in the basic safety instructions
provided with the instrument.
4.1.2 Accessory List
The instrument comes with the following accessories:
●
Power cable
●
Printed Getting Started manual
Putting into Operation
To Next Page
Loading...
