Rohde & Schwarz M3SR Series 4100 - Installation of Radio Controller (A60); Fig. 5.7 Removing the Radio Controller (A60)

R&S M3SR Series 4100 HF Transceivers Radio Controller - Removal and Installation
6124.9007.82.01 5.14
Fig. 5.7 Removing the Radio Controller (A60)
1 Connector X20 (cable W96)
2 Connector X18 (cable W98)
3 Connector X55 (cable W55)
4 Connector X54 (cable W64)
5 Connector X15 (cable W95)
6 Screws (8x)
5.6.2 Installation of Radio Controller (A60)
To install a new or repaired Radio Controller (A60) proceed as follows:
1. Install the Radio Controller (A60) in reverse order of removal.
2. Close the R&S M3SR Series 4100 150 W HF Transceiver in reverse order as described in
5.1 - Disassembly.
x8
ICN-S4100-A-E11100-R-D0894-00116-A-01-1
1
2
3
4
5
6