Rohde & Schwarz M3SR Series 4100 - Fig. 5.14 Disconnecting Cables on Motherboard; Fig. 5.15 Fixing Screws at the Transceiver Rear

Motherboard - Removal and Installation R&S M3SR Series 4100 HF Transceivers
5.25 6124.9007.82.01
Fig. 5.14 Disconnecting Cables on Motherboard
5. Turn the R&S M3SR Series 4100 150 W HF Transceiver in working position and by using a screw
driver, undo and remove the four screws at the transceiver rear fixing the interface panel.
Fig. 5.15 Fixing Screws at the Transceiver Rear
ICN-S4100-A-E11100-R-D0894-00126-A-01-1
ICN-S4100-A-E11100-R-D0894-00125-A-01-1