Rohde & Schwarz M3SR Series 4100 - Test of Equipment Functions; Test Equipment and Tools

Test of Equipment Functions R&S M3SR Series 4100 HF Transceivers
3.1 6124.9007.82.01
3 Test of Equipment Functions
3.1 Test Equipment and Tools
The function tests according to 3.3 - Function Test require the test equipment listed in Table 3.1.
NOTE:
Equivalent test equipment may be used. Special tools are not required.
Table 3.1: List of Test Equipment
Item Test Equipment, Required Data Equipment recom-
mended by R&S
Ordering Code
1 Comfort Control Unit (for transceiver
without R&S
GB 4000C)
R&S GB 4000C 6105.6006.02
2 Power Supply 28 V, 25 A R&S IN 4000A 6105.5500.03
3 Modulation Analyzer R&S FMA 852.8500.52
4 Spectrum Analyzer R&S FSQ8 1155.5001.08
5 2x Signal Generator 1.5 to 30 MHz R&S SMU200A 1141.2005.02
6 Power Meter R&S NRT 1080.9506.02
Power Sensor 100 W R&S NAP-Z7 0350.8214.02
7 Power Attenuator 40 dB, 50 Ω
(>
100 W)
conventional workshop
model
8 Audio Analyzer R&S UPL 1078.2008.06
9 2x Audio Signal Generator
10 Splitter / Combiner conventional workshop
model
11 Digital Multimeter conventional workshop
model
12 Headset with PTT button e.g. R&S GA 015L
conventional workshop
model