System / Equipment Configuration R&S M3SR Series 4100 HF Transceivers
6.1 6124.9007.82.01
6 System / Equipment Configuration
6.1 General
With R&S M3SR Series 4100 150 W HF Transceiver, all system / equipment configuration is factory-
set by way of software and in compliance with the customer’s specifications. Such settings cannot be
altered by the user.
If the configuration needs to be modified, please contact Rohde & Schwarz for assistance.
6.2 Software Update
The Software is delivered in three major packages:
The firmware for the FK 41x0 Digital Selector (option) and the R&S GS 4102 NMEA Interface (option)
can be installed separately.
6.3 Option Keys
For key loading and distribution to radio controllers, a remote key distributor software is used. Keys
have to match the serial No. and type of the Radio Controller.
Type Example: 6126.4877.12 – 10023, as stated on the Radio Controller board.
For details of the R&S Software Distributor please refer to the respective documentation or the online
help.
Software Contents
FSW Radio Controller Firmware, Net List, DSP Applications for the Vocoders, the
ALE and the SECOM-H Waveforms and codecs
CU_MMI Firmware for the R&S GB 4000C Comfort Control Unit, defining capabilities for
the transceiver type
Firmware Package Firmware for the Frontend (A1), Synthesizer (A2), Mainboard (A20) and Power
Amplifier (A30).
To Next Page
Loading...
