Rohde & Schwarz M3SR Series 4100 - Installation of R&S GB 4000 C Comfort Control Unit

R&S GB 4000C - Removal and Installation R&S M3SR Series 4100 HF Transceivers
5.19 6124.9007.82.01
5.8.2 Installation of R&S GB 4000C Comfort Control Unit
To install a new R&S GB 4000C Comfort Control Unit proceed as follows:
NOTE:
Take care that the cable W400 is properly folded.
1. Install the R&S GB 4000C Comfort Control Unit in reverse order of removal.
2. Close the R&S M3SR Series 4100 150 W HF Transceiver in reverse order as described in
5.1 - Disassembly.