Front Panel - Removal and Installation R&S M3SR Series 4100 HF Transceivers
5.23 6124.9007.82.01
5.10.2 Installation of Front Panel (A10)
To install a new Front Panel (A10) proceed as follows:
1. Install the Front Panel in reverse order of removal.
2. Install the R&S GB 4000C Comfort Control Unit in reverse order as described in 5.8 - Removal
and Installation.
3. Close the R&S M3SR Series 4100 150 W HF Transceiver in reverse order as described in
5.1 - Disassembly.
To Next Page
Loading...
