Rohde & Schwarz ZNB40 - Mmemory:delete:correction

Command Reference
R&S
®
ZNB/ZNBT
1070User Manual 1173.9163.02 ─ 54
Usage: Setting only
MMEMory:DELete:CORRection <CalGroupName>
Deletes a system error correction data set stored in the cal pool (cal group file).
Setting parameters:
<CalGroupName> String parameter to specify the name of the cal group file to be
deleted. Cal group files must have the extension *.cal. The
directory path must not be specified; the analyzer always uses
the default cal pool directory
C:\Users\Public\Documents\Rohde-Schwarz\Vna\
Calibration\Data.
Example: See MMEMory:LOAD:CORRection
Usage: Setting only
Manual operation: See "Pool / Delete from Pool" on page 501
MMEMory:FAVorite<FavId> <RecallSetFile>
Manages the list of favorite recall sets
Suffix:
<FavId>
.
Position in the favorites list
Setting parameters:
<RecallSetFile> File path, either absolute or relative to the current directory (see
MMEMory:CDIRectory). The empty string represents an empty
position in the favorites list.
Note that when a non-empty favorite is set, the target recall set
must exist.
Example:
:MMEMory:CDIRectory DEFault
:MMEM:FAV1 'RecallSets\My_RecallSet1.znx'
Sets My_RecallSet1.znx at position 1 of the favorites list.
MMEM:FAV1?
Returns 'C:\Users\Public\Documents\Rohde-Schwarz\
Vna\RecallSets\My_RecallSet1.znx'
MMEM:FAV1 'RecallSets\My_RecallSet2.znx'
Sets My_RecallSet2.znx as favorite 1, overwriting the previ-
ous favorite 1
MMEM:FAV1 ''
Clears position 1 of the favorites list
MMEM:FAV1?
Returns ''
Manual operation:
See "Import" on page 626
SCPI Command Reference