Rohde & Schwarz ZNB40 - Calculate<Chn>:Statistics[:State]; Calculate<Chn>:Statistics[:State]:Area

Command Reference
R&S
®
ZNB/ZNBT
919User Manual 1173.9163.02 ─ 54
Parameters:
<Boolean> ON | OFF - Statistical info field on or off.
*RST: OFF
Example:
*RST; :CALC:STAT:MMPT ON
Reset the instrument, hiding all statistical results. Display the
"Min/Max/Peak-Peak" results.
CALC:STAT:MSTD ON
Display the "Mean/Std Dev" results in addition.
CALC:STAT:RMS ON
Display the "RMS" results in addition.
CALC:STAT:EPD ON
Display the "Phase/El Length" results in addition.
CALC:STAT:SFL ON
Display the "Flatness/Gain/Slope" results in addition.
CALC:STAT:STAT:AREA LEFT, TOP
For a subsequent check at the GUI or a hardcopy, move the info
field to the top left position.
...
CALC:STAT OFF
Hide all results.
Manual operation:
See "Min/Max/Peak-Peak, Mean/Std Dev/RMS" on page 326
CALCulate<Chn>:STATistics[:STATe]:AREA <HorizontalPos>, <VerticalPos>
Moves the statistics info field for the active trace <Chn> to one of nine predefined posi-
tions in the active diagram.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<HorizontalPos> LEFT | MID | RIGHt
Horizontal position
<VerticalPos> TOP | MID | BOTTom
Vertical position
Example: See CALCulate<Chn>:STATistics[:STATe]
Manual operation: See "Min/Max/Peak-Peak, Mean/Std Dev/RMS" on page 326
CALCulate<Chn>:STATistics:DOMain:USER <EvalRange>
Selects one out of 10 evaluation ranges to be configured with the CALCulate<Chn>:
STATistics:DOMain:USER:SHOW, CALCulate<Chn>:STATistics:DOMain:
USER:STARt, and CALCulate<Chn>:STATistics:DOMain:USER:STOP com-
mands.
Suffix:
<Chn>
.
Channel number used to identify the active trace
SCPI Command Reference