Rohde & Schwarz ZNB40 - Calculate<Chn>:Marker:mpeak:threshold; Calculate<Chn>:Marker:mpeak:threshold:state

Command Reference
R&S
®
ZNB/ZNBT
874User Manual 1173.9163.02 ─ 54
Use CALCulate<Chn>:MARKer:MPEak:EXCursion:STATe to activate it.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Value> Minimum peak excursion
The unit is derived from the active trace format and cannot be
modified. Changing the trace format resets the excursion to a
format-specific default value.
Manual operation: See "Excursion Settings" on page 373
CALCulate<Chn>:MARKer:MPEak:EXCursion:STATe
<Boolean>
Activates or deactivates the minimum excursion for multiple peak searches.
Use CALCulate<Chn>:MARKer:MPEak:EXCursion to set the minimum peak excur-
sion.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Active> Boolean
Manual operation: See "Excursion Settings" on page 373
CALCulate<Chn>:MARKer:MPEak:THReshold <Value>
Defines a threshold value for multiple peak searches.
Use CALCulate<Chn>:MARKer:MPEak:THReshold:STATe to activate it.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Value> Threshold value
The unit is derived from the active trace format and cannot be
modified. Changing the trace format resets the threshold to a
format-specific default value.
Manual operation: See "Threshold Settings" on page 373
CALCulate<Chn>:MARKer:MPEak:THReshold:STATe <Boolean>
Activates or deactivates the threshold for multiple peak searches.
Use CALCulate<Chn>:MARKer:MPEak:THReshold to set the threshold value.
Suffix:
<Chn>
.
Channel number used to identify the active trace
SCPI Command Reference