ROHO AGILITY - Table of Contents

- 1 -
INTENDED USE 2
INFORMATION FOR SAFETY 2-3
PARTS DETAIL 4-5
PRODUCT SPECIFICATIONS 5-6
BACK CANE HARDWARE INSTALLATION AND REMOVAL 7
AGILITY INSTALLATION AND REMOVAL 8-9
FLIP BACK SHELL 9
WIDTH ADJUSTMENT 10
HEIGHT ADJUSTMENT 11
DEPTH AND ANGLE ADJUSTMENT 12
COVER REMOVAL AND INSTALLATION 13
COVER COMPONENTS - REMOVAL AND INSTALLATION 13-14
COVER COMPONENTS - AIR INSERT ADJUSTMENT 15
ACCESSORIES 16
CLEANING AND DISINFECTING 17
MAINTENANCE, DISPOSAL AND TROUBLESHOOTING 18
RETURN POLICY, CONTACT INFORMATION AND LIMITED WARRANTY 19
ESPAÑOL
20
FRANÇAIS
39
TABLE OF CONTENTS
ROHO, Inc. has a policy of continual product improvement and reserves the right to amend this document. The current version of this document is available
at www.therohogroup.com.
ROHO® AGILITY™ Back Systems are manufactured by ROHO, Inc.,
100 North Florida Avenue, Belleville, Illinois 62221-5429
www.therohogroup.com.
U.S.A.: 1-800-851-3449, Fax 1-888-551-3449 e-mail: cs@therohogroup.com
Outside the U.S.A.: 1-618-277-9150, Fax 1-618-277-6518 e-mail: intl@therohogroup.com
© 2012, 2014 ROHO, Inc.
The following are trademarks and registered trademarks of ROHO, Inc.: ROHO
®
, AGILITY
™
, and shape fitting technology
®
.
Zytel
®
is a registered trademark of DuPont.
Products in this manual may be covered by one or more U.S. and foreign patents and trademarks. For further details please refer to www.therohogroup.com.