EasyManua.ls Logo

Roland EGX-350 - Page 8

Roland EGX-350
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To Ensure Safe Use
6
This machine weighs 34 kg (75 lb.)
CAUTION
Unloading and emplacement are opera-
tions that must be performed by 2 persons
or more.
Tasks that require undue effort when per-
formed by a small number of persons may
result in physical injury. Also, if dropped, such
items may cause injury.
CAUTION
Install in a location that is level and
stable.
Installation in an unsuitable location may
cause an accident, including a fall or tipover.
The cutting waste or workpiece may catch re or pose
a health hazard.
CAUTION
Never attempt to cut magnesium or any
other such ammable material.
Fire may occur during cutting.
Keep open flame away from the work
area.
Cutting waste may ignite. Powdered material is
extremely ammable, and even metal material
may catch re.
When using a vacuum cleaner to take up
cutting waste, exercise caution to prevent
re or dust explosion.
Taking up fine cuttings using an ordinary
vacuum cleaner may cause danger of re or
explosion. Check with the manufacturer of the
vacuum cleaner. When the safety of use can-
not be determined, clean using a brush or the
like, without using the vacuum cleaner.
CAUTION
Wear dust goggles and a mask. Wash
away any cutting waste remaining on the
hands.
Accidentally swallowing or inhaling cutting
waste may be hazardous to the health.

Table of Contents

Related product manuals