13
Let’s try listening to the internal songs and the songs recorded in
internal memory. For the titles of the internal songs, refer to “Internal
Song list” (p. 33).
Memo
If you want to connect a CD drive (sold separately) and play back
songs from a CD, refer to the CD drive’s owner’s manual.
Playing back a song
1. Press the [Song] button once or twice so the display will
indicate song name and song number.
2. Use the [–] [+] buttons to select the song you want to
listen to.
The F-120R’s internal memory already contains a number of songs
when it leaves the factory. These songs reside in three banks (a,
b and c). There is also a “U” bank where you can save your own
recordings (p. 26). (And if you connect a USB memory, you will also
be able to play back songs of the “S” bank. “S” refers to the USB
memory. See “Playing back Songs or Rhythms on a USB memory”
(p. 20).)
3. To quickly jump to the next bank, hold down the [+]
button and press [–].
To jump to the rst song of the previous bank, hold down
[–] and press [+].
Depending on the bank you select, the display now looks as
follows:
Polonais
ä001
• Categories beginning with “A”, “B”, “C” are
internal songs.
• “U” and a number refers to songs you’ve
recorded in internal memory.
• “S” and a number refers to songs on a
connected USB memory.
Note
* If the name of the selected song does not t in the top line, it
will scroll through the display.
* The songs in internal memory (Ü01~Ü10) will not be shown if
they have not been recorded.
* For the titles of the internal songs, refer to “Internal Song list”
(p. 33).
4. Press the [ ] button to start playback.
The song will begin playing. When the song has nished playing to
the end, it will stop.
Note
The F-120R can also play back songs directly from a USB
memory. This includes audio song les (.WAV). See “Playing back
Songs or Rhythms on a USB memory” (p. 20) for details.
Viewing the measure number/selecting a
dierent measure
1. To see the measure numbers while the F-120R plays back
the selected song, press the [Song] button once or twice.
The display then changes to:
Polonais
M:3
Song name
Measure number
In the case of an audio le, the display shows the elapsed playing
time.
Amazing
0‚01
2. You can now press [–] to rewind (jump to an earlier
measure) or [+] to fast-forward.
The measure indication in the display will increase or decrease each
time you press the button.
By holding down a button, you can rapidly increase or decrease the
measure number.
Stopping the song
1. Press the [ ] button to stop playback.
The song will stop.
Song navigation functions
The F-120R also allows you to quickly return to the beginning of the
current song, to jump to the beginning of the previous song, and to
select subsequent songs.
Button Explanation
[
]
Press this button to return to the beginning of the
current song.
Press it again to jump to the beginning of the
preceding song.
[
]
This button allows you to jump to the beginning of
the next song in the list.
Changing the tempo of the current song
Each song contains a default tempo setting that is used each time
you select a song and start playback. You can, however, slow it
down or speed it up by proceeding as follows:
1. After selecting the desired song, press the [Song] button
several times until the display looks as follows:
Tempo ¯=
112
Tempo %=
100
(for an SMF song) (for an audio song)
2. Use the [–] [+] buttons to set the desired tempo.
To return to the song’s default tempo, simultaneously press the [–]
and [+] buttons.
Playing back songs