Roland Fantom-S - Changing Arpeggio Settings

21
Try Out the Various Performance Features
Changing Arpeggio Settings
1.
Press ARPEGGIO/RHYTHM [SELECT/EDIT], and the press [3 (Arp)].
The Arpeggiator screen appears.
fig.Q-27
In this window you can adjust various arpeggio-related settings.
2.
Press or to select a parameter, and then turn the VALUE dial to
change the settings for the various parameters.
These settings determine how the arpeggiator plays its notes.
Switching to Another Arpeggio Style
You can switch to another arpeggio style by moving the cursor to “Style” and turning the
VALUE dial to change the number.
3. Press [EXIT] to close the Arpeggio window.
Using the Chord Memory Function with the Arpeggio
Chord Memory is a function that sounds a specified chord form when you press a single key.
For example you can register the chord form “C,” “E,” and “G” so that the chord “C-E-G” will
sound when you press the C key.
When the arpeggiator is on, you can recall a chord form to easily create complex arpeggio
sounds.
Press ARPEGGIO/RHYTHM [CHORD MEMORY] to make the button light, and the Chord
Memory function will be turned on.
In arpeggio settings, Style
(Arpeggio Style) is particularly
important. The arpeggio’s
playback pattern is determined
primarily by the value selected
for this parameter. For details,
refer to “Arpeggio Settings
(Arpeggio)” (Owner’s Manual;
p. 107).
If you want to make more
detailed settings, press [EDIT].
For details, refer to p. 105 in
the Owner’s Manual.
In Performance mode,
Arpeggio/Rhythm function
settings can be saved as
performance settings for each
individual performance. This
allows you to create a
performance that contains the
desired arpeggiator settings. In
addition, when you use the
Fantom-S’s sequencer to create
a song, the Fantom-S offers
you the convenience of using
the Arpeggio function to
perform bass and other parts
during recording (p. 42).
Fantom-s_e.book 21 ページ ２００３年５月１５日 木曜日 午後１時２５分