43
Creating a Song
Recording the Piano Part
Next we will record the piano part. Use the keyboard to record the piano part in realtime.
1.
From the Performance Layer screen, press to move to “PART3.”
Play the keyboard, and verify that you hear the piano sound.
2.
Press [REC] to access the Realtime Rec Standby window.
3.
In the Realtime Rec Standby window, press [8 (Start)] and then press [7
(Rehearsal)] to make the indicator blink.
You will hear the rhythm part and bass part. Since the rehearsal function is on, nothing will be
recorded when you play the keyboard. Play the keyboard to practice the piano part. The “8va”
indication in the score indicates that you are to play one octave lower than written.
fig.score4
4.
When you have finished practicing, press [7 (Rehearsal)] to start recording
(this defeats Rehearsal mode).
The [REC] indicator will change from blinking to lit, and recording will begin. The measure is
shown in the Realtime Recording window. Since you are using Mix recording, it is not
necessary for you to input both measures completely. Even if you record one measure at a time,
your recording will be added to the previously-recorded material.
3.
When you have finished recording, press [STOP].
This completes recording of the piano part.
Press [RESET] to return to the beginning of the measures, and press [PLAY] to hear the
playback.
Piano part
Realtime recording This is a
method in which your
performance on the keyboard
or pads and your controller
operations are recorded
exactly as you play them.
If you want to choose a
different sound, press [1 (Patch
List)].
If you also hear the sound of
other parts, make sure that
“KBD” does not have a check
mark (✔).
If You Make a Mistake (Realtime Erase)
Realtime Erase is a function that erases unwanted data while you are still recording. This
function is convenient during Loop recording sine you can erase data without halting
recording.
1. In the Realtime Recording window, press [6 (Erase)].
If this window is not displayed, press [PLAY] during recording to access it. Each time you press
[PLAY], the Realtime Recording window will alternately be hidden or displayed.
fig.Q-47b_50
2. If you press [7 (Erase All)], all data will be erased. To erase notes of a
specific pad, press that pad. Data will be erased while you continue
pressing that pad.
Fantom-s_e.book 43 ページ ２００３年５月１５日 木曜日 午後１時２５分
To Next Page
Loading...
