31
Creating a Song
To create a song, you will use the Fantom-S’s Performance mode to create a set of sounds for
your song, and then record the song data into the sequencer.
Here’s how you can easily create a song by using rhythm patterns or the sampling function to
record into the sequencer.
This chapter explains how to create a song like the following.
fig.score1
1. Play the rhythm part on the pads, and mix-record it while looping
2. Recording the bass part as arpeggios
3. Realtime-record the piano part
4. Record the vocal part
What is a Performance?
A performance is a set patches and/or rhythm sets assigned to each of the sixteen parts,
allowing you to use sixteen sounds simultaneously.
fig.Q-01-05.e
The Fantom-S has a Layer screen (press [LAYER/SPLIT]) and a Mixer screen (press [MIXER]).
Use the Layer screen when you want to make settings for playing multiple patches together
(layered) or separately in different regions of the keyboard (split).
Use the Mixer screen when you want to make mixing settings such as adjusting the level and
pan for each of the sixteen parts.
Performance
Part 16
Part 1
Patch/
Rhythm Set
Layer/Split
Mixer
Piano part
Vocal part
Bass part
Rhythm part
There's something about you, baby
Mix recording A method of
recording in which you can
listen to the previously-
recorded sounds while you
continue recording additional
material.
Realtime recording A method
of recording in which your
keyboard or pad playing and
controller operations are
recorded exactly as you
perform them.
What is a Part? A part is a
location or “slot” to which you
can assign a patch or rhythm
set. In Performance mode, each
performance has 16 parts, and
you can assign a patch or
rhythm set to each part.
Fantom-s_e.book 31 ページ ２００３年５月１５日 木曜日 午後１時２５分
To Next Page
Loading...
Need help?
General
