EasyManuals Logo

Roland Fantom-S Quick Start

Roland Fantom-S
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Try Out the Sounds
Playing the Sounds
The Fantom-S comes with a wide range of onboard sounds, including single tones called
patches
.
Let’s select a few patches to get an idea of the variety of sounds available with the Fantom-S.
1.
Press [PATCH/RHYTHM].
The Patch Play screen appears.
On the Fantom-S you can play patches and rhythm sets from both the keyboard and the pads.
Play the keyboard and pads to hear the sound.
On the Fantom-S, a “part” is something to which you assign a patch or rhythm set. Patch mode
has two parts, the
Keyboard part
and the
Pad part
, and you can assign a patch or rhythm set
to each of these parts.
fig.Q-07.e
2.
To select the Keyboard part, press [1 (Kbd Part)].
3.
To select the Pad part, press [2 (Pad Part)].
fig.Q-07b
4.
If you want to switch the patch of the Keyboard part to another patch, press [1
(Kbd Part)] to move the cursor to the patch number, and then turn the VALUE
dial or use [INC] [DEC].
When the patch number is highlighted, you can select a patch. When the patch group is highlighted,
you can select a group. On the Fantom-S, the patches are organized into five groups; user, preset,
GM, card, and expansion board. Use to move the highlighted cursor.
5.
If you want to switch the patch of the Pad part to another patch, press [2 (Pad
Part)] to move the cursor to the patch number, and then turn the VALUE dial
or use [INC] [DEC].
6.
To switch between playing a patch or a rhythm set, use [CURSOR] to move
the cursor to the patch type, and then use [INC] [DEC] to select either patch
(Patch) or rhythm set (Rhythm).
Patch Number
Patch Group
Patch Type
For more information about
factory patches and rhythm
sets, refer to “Patch List,”
“Rhythm Set List”.
Patches and Rhythm sets XP-
A–D can be selected only if a
Wave Expansion Board (sold
separately) has been installed
in the corresponding slot.
What is a Patch? Patches are
the basic sound configurations
that you play during a
performance. Each patch can
b
e configured by combining
up to four tones.
What is a Tone? On the
Fantom-S, the tones are the
smallest unit of sound.
However, it is not possible to
play a tone by itself. The patch
is the unit of sound which can
be played, and the tones are
the basic building blocks
which make up the patch.
Fantom-s_e.book 7 ページ 2003年5月15日 木曜日 午後1時25分

Table of Contents

Other manuals for Roland Fantom-S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland Fantom-S and is the answer not in the manual?

Roland Fantom-S Specifications

General IconGeneral
BrandRoland
ModelFantom-S
CategoryElectronic Keyboard
LanguageEnglish

Related product manuals