Roland Fantom-S - Editing the Effect Settings

49
Creating a Song
Editing the Effect Settings
1.
Press [EFFECTS] to access the Effects screen.
fig.Q-59_50(14-01a)
2.
Press the [1 (Routing)]–[7 (Mastering)] to select the effect that you want to
edit.
[3 (MFX1/2/3)] will alternate between 1, 2, and 3 each time you press the button.
• Specify how effects are connected and applied → [1 (Routing)]
• Edit the multi-effect settings → [3 (MFX1/2/3)]
• Edit the chorus settings → [5 (Chorus)]
• Edit the reverb settings → [6 (Reverb)]
3. Press [CURSOR] to select a parameter.
4.
Turn the VALUE dial or press [INC]/[DEC] to specify the value.
When you have finished editing, press [EXIT] to return to the previous screen.
For details on effect settings,
refer to “Adding Effects”
(p.175) in the Owner’s Manual.
Fantom-s_e.book 49 ページ ２００３年５月１５日 木曜日 午後１時２５分