15
Try Out the Sounds
6
Turn the VALUE dial or use [DEC]/[INC] to choose “62.”
Performance “PRST: 62 OvertoneStak” is now selected.
fig.Q-14_60
7
Play the keyboard.
The two patches assigned to Parts 1 and 2 sound together.
Changing the Performance Settings
For details about how you can adjust the most important settings for a performance,
refer to the following pages of the owner’s manual.
• Selecting the parts that’ll sound → (Owner’s Manual; p. 98)
• Switching the patch assigned to a part → (Owner’s Manual; p. 100)
• Adjusting volume/pan/pitch → (Owner’s Manual; p. 100)
• Applying effects to the performance → (Owner’s Manual; p. 170)
• Saving a performance whose settings you’ve modified → (Owner’s Manual; p.
93)
To Next Page
Loading...
