Roland Fantom - Customize Arpeggiator Settings

24
Try Out the Various Performance Features
Changing Arpeggiator Settings
1
Hold down [JUMP] and press [ARPEGGIO].
The Arpeggio window appears.
fig.Q-27_60
In this window you can adjust various arpeggio-related settings.
2
Turn the VALUE dial to change the settings for the various
parameters.
These settings determine how the arpeggiator plays its notes.
3
Press [8 (Close)] to close the Arpeggio window.
In arpeggio settings, Style
(Arpeggio Style) is
particularly important. The
arpeggio’s playback pattern is
determined primarily by the
value selected for this
parameter. For details, refer to
“Arpeggiator Settings
(Arpeggio)” (Owner’s
Manual; p. 51).
Arpeggiator settings can be
saved with each patch/
performance. This allows you
to create a patch or
performance that contains the
desired arpeggiator settings. In
addition, when you use the
Fantom’s sequencer to create a
song, the Fantom offers you
the convenience of using the
Arpeggiator to perform bass
and other parts during
recording (p. 39).
For details on using the
Arpeggiator, refer to “Playing
Arpeggios (Arpeggiator)”
(Owner’s Manual; p. 38), and
“Arpeggiator Settings
(Arpeggio)” (Owner’s
Manual; p. 51)