44
Using the Sequencer to Create a Song
10
Press [8 (OK)] to finalize the volume label.
The Quick Format Floppy Disk window appears.
fig.Q-51b_60
11
Press [8 (Execute)] once again to execute the Format operation.
When formatting is completed, the display indicates “Complete !.”
Saving a Song On a Disk
Here’s how to save a song on the disk you’ve just formatted.
1
Access the Disk Utility screen (p. 42).
2
Press [2 (Save)].
The Select Command window appears.
fig.Q-52_60
3
Press or to select “Save Song File,” and then press [8
(Select)].
The Save Song File window appears.
fig.Q-52a_60
4
Press [5 (Name)].
The Save Song File window appears.
fig.Q-52b_60
If it is not possible to format
using “Quick Format Floppy
Disk,” a message of “You
Cannot Quick Format This
Disk” will appear. In this case,
select “Full Format Floppy
Disk” in step 6, and format the
disk.
To Next Page
Loading...
