Roland Fantom - Page 43

43
Using the Sequencer to Create a Song
4
Press or to select “Disk Utility,” and then press [8 (Select)].
The Disk Utility screen is displayed.
fig.Q-50_60
5
Press [6 (Tool)].
The Select Command window appears.
fig.Q-51_60
6
Press or to select “Quick Format Floppy Disk,” and then
press [8 (Select)].
The Quick Format Floppy Disk window appears.
fig.Q-51a_60
7
Assign a volume label. Press or to move the cursor to the
location where you wish to input a character.
8
Turn the VALUE dial or use [INC], [DEC], , to select the
character that you wish to input.
To insert a space at the cursor location, press [3 (Insert)].
To delete the character at the cursor position, press [4 (Delete)].
9
Repeat steps 7 and 8 to assign the file name.