Roland Fantom User Manual

42
Using the Sequencer to Create a Song
Saving the Recorded Song to Disk
Let’s save our new song onto a disk. If it’s not saved, all of the song data will be lost
when the power to the Fantom is switched off, or in the event of a power
interruption.
Formatting a Disk
Before you can save Fantom data to a new disk or a disk that’s been formatted for
another device, the disk must be formatted by the Fantom.
1
Set the protect tab of the disk to the Write position.
fig.Q-49.e
2
Insert the disk into the disk drive.
fig.Q-49a
3
Press [MENU].
The Menu window appears.
fig.Q-39_60
Formatting deletes all data
previously written on the disk.
Check the disk’s contents very
carefully before formatting to
make sure you don’t lose any
important data.
Protect tab
Write (writing permitted)
Protect (writing prohibited)

Roland Fantom Specifications

General

Arpeggiator	Yes
Keyboard	61 keys, 76 keys, 88 keys with velocity and aftertouch
Sound Engine	ZEN-Core
Polyphony	256 voices
Effects	Multi-effects, reverb, chorus, delay
Sequencer	16-track MIDI sequencer
Display	7-inch touchscreen LCD
Connectivity	MIDI (IN, OUT); USB
Type	Synthesizer
Sampling	Yes
Audio Interface	24 bit
Presets	Over 3, 500