27
Recording
Recording the completed song to digital recorder
Here’s how the song (audio data) that you completed in the preceding section can be
passed through the SC-D70 and recorded on a digital recorder such as an MD or
DAT.
■ Connecting your digital recorder
Connect your digital recorder (e.g., MD or DAT) to the SC-D70 as shown below.
fig.22-13.e
When you make digital connections with a digital recorder, you must set the SC-
D70’s sampling frequency to match the sampling frequency of the connected
recorder. After setting the sampling frequency select switch to the desired
sampling frequency, turn on the power of the SC-D70.
fig.22-14.e
SC-D70
DIGITAL INDIGITAL IN
Digital Recorder Stereo set
If the sampling frequency
of the output and input are
different, the audio quality
will be affected. In
addition, an excessive
urden will be placed on
the computer, possibly
causing its operation to
ecome unstable.
The sampling frequency
will not change if you
operate the sampling
frequency select switch
while the power of the SC-
D70 is turned on.
The sampling frequency for
MD is 44.1 kHz, and for
DAT is 48 kHz.
Sampling Frequency Select Switch
To Next Page
Loading...
Need help?
General
