Roland TD-50 User Manual (English)

Other manuals for Roland TD-50

Questions and Answers:

S
Stephanie YoungAug 12, 2025
Why is there no sound or insufficient volume on my Roland Drums?
- S
  Sarah SimpsonAug 13, 2025
  If you're experiencing no sound or low volume with your Roland Drums, there are several things to check: * Ensure all connections are secure. * Adjust the master volume to an appropriate level. * Verify that your audio system is working correctly. * Adjust the volume to an appropriate level. * Turn the [MIX IN] knob to an appropriate level. * Make sure that “Local Control” is set to “ON.”
E
Elizabeth MooneyAug 16, 2025
What to do if a specific pad on my Roland TD-50 doesn't sound?
- R
  Robert BullockAug 16, 2025
  If a specific pad on your Roland Drums isn't producing sound, consider the following: * Check all cable connections. * Assign an instrument to the pad. * Adjust the instrument’s “Volume.” * Check the settings for “OUTPUT.” * Adjust the settings of the faders. * If you deleted the user sample that’s assigned to a pad, it will not produce sound. Either load the user sample once again, or assign a different instrument. * Set the pad’s “trigger type.” * Check the connections.
S
Stephen AllisonAug 20, 2025
What to do if my SD card is connected to Roland Drums but not recognized or data is not visible?
- S
  Sarah ColeAug 20, 2025
  If your Roland Drums doesn't recognize the SD card or the data isn't visible, format the SD card on this product.
K
Kara PetersonAug 25, 2025
What to do if no sound when you strike a pad connected to a DIGITAL TRIGGER IN port on Roland TD-50?
- N
  nmirandaAug 25, 2025
  If you're not getting sound when striking a pad connected to the DIGITAL TRIGGER IN port on your Roland Drums: * After connecting the pad, specify the trigger input that it will play. * Use wood or plastic sticks. Using carbon or metal sticks might make the sensor malfunction. * Use nylon brushes. Using metal brushes might make the sensor malfunction, or might scratch the pad.
A
Allison RomanAug 28, 2025
What to do if there is no sound when you strike a pad assigned to a TRIGGER IN jack on Roland Drums?
- J
  Jared NelsonAug 28, 2025
  If there's no sound when you strike a pad assigned to a TRIGGER IN jack on your Roland Drums, disconnect the pad connection cable from the DIGITAL TRIGGER IN port.
D
Daniel Brown VAug 31, 2025
What to do if my Roland Drums can’t communicate with a computer?
- B
  Brandy SimpsonAug 31, 2025
  If your Roland Drums is unable to communicate with your computer, try these steps: * Check the USB cable connection. * Install the USB driver on your computer to transmit and receive audio as USB AUDIO. * Use a cable that supports USB 2.0; the product cannot be used with a cable that supports USB 3.0. * Choose the setting that’s appropriate for your situation.
T
Tina McguireSep 4, 2025
What to do if I can’t play or import an audio file on my Roland TD-50 Drums?
- V
  Veronica JonesSep 4, 2025
  If you're having trouble playing or importing an audio file on your Roland Drums: * Check the audio file format, file name, and file name extension. * Check the location of the audio file. * Keep the number of audio files in a folder to 200 or fewer.
A
Aaron GonzalezSep 8, 2025
Why can’t I play MP3 or WAV files on my Roland TD-50?
- C
  Chad WilsonSep 8, 2025
  If you can’t play MP3/WAV files on your Roland Drums, use MP3/WAV files that the product supports. Playback may be unable to keep up if you raise the playback speed of a high bit-rate of MP3.

Roland TD-50 Specifications

General

Sample rate	44.1 kHz
Drum sound types	Ambience, Crash, Hi-hat, Kick, Ride, Snare drum, Tom
Number of samples	500
Drum kits quantity	100
Sample audio formats	WAV
Reverberation effects quantity	5
Display type	LCD
Built-in display	Yes
Power source type	AC
USB connector type	USB Type-B
Headphone connectivity	6.3 mm
Compatible memory cards	SD
6.35 mm (1⁄4-inch) output	12