Roland TD-50 - Deleting Backup Data from an SD Card (DELETE;1 KIT DELETE); Checking the Usage Status of an SD Card (INFO); Formatting an SD Card (FORMAT)

41
Settings
Deleting Backup Data from an SD Card
(DELETE/1 KIT DELETE)
Here’s how to delete unneeded backup data (including user
samples) from an SD card.
1. Insert an SD card into the TD-50 (p. 8).
2. Press the [SD CARD] button.
3. Use the PAGE [UP] [DOWN] buttons and the function
buttons to select a backup menu item.
Backup menu Explanation
DELETE (page 1 (SD CARD BACKUP ALL)) Deletes backup data.
1 KIT DELETE
(page 2 (SD CARD BACKUP 1KIT))
Deletes kit backup data.
The SD CARD DELETE screen appears.
Example) When using DELETE
4. Specify the deletion settings.
Parameter Explanation
Bank Number
(when using DELETE)
Select the backup number that you want to delete.
SD Card (when using 1
KIT DELETE)
Select the kit backup number that you want to
delete.
5. Press the [F5] (DELETE) button.
A conrmation message appears.
Example) When using DELETE
If you decide to cancel, select “CANCEL” and press the [ENTER] button.
6. Select “OK” and press the [ENTER] button.
The backup data is deleted from the SD card.
Checking the Usage Status of an SD Card (INFO)
Here’s how to check the number of settings that are saved on the
SD card.
1. Insert an SD card into the TD-50 (p. 8).
2. Press the [SD CARD] button.
3. Press the PAGE [DOWN] button to access page 3
(SD CARD UTILITY).
4. Press the [F1] (INFO) button.
The SD CARD INFO screen appears.
Parameter Explanation
Backup All Number of saved backup data
1 Kit Number of saved kit backup data
Rec Data Number of saved recorded data
5. Press the [KIT] button to return to the DRUM KIT screen.
Formatting an SD Card (FORMAT)
Here’s how to format an SD card.
* Before using an SD card for the rst time with the TD-50, you
must format the SD card.
NOTE
When you format an SD card, all data on the SD card is erased.
If important data is saved on the SD card, back up the data to
your computer before you proceed with formatting the SD card.
1. Insert an SD card into the TD-50 (p. 8).
2. Press the [SD CARD] button.
3. Press the PAGE [DOWN] button to access page 3
(SD CARD UTILITY).
4. Press the [F3] (FORMAT) button.
The SD CARD FORMAT screen appears.
5. Press the [F5] (FORMAT) button.
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
6. Select “OK” and press the [ENTER] button.
The SD card will be formatted.
NOTE
While formatting is in progress, never turn o the power or
remove the SD card.