Roland TD-50 - Settings for the Entire TD-50 (SETUP); Audio Output Assignments (OUTPUT)

42
Settings
Settings for the Entire TD-50 (SETUP)
Settings that are common to the entire TD-50, such as the output
destination settings and the footswitch settings, are called “setup”
data.
1. Press the [SETUP] button.
The SETUP MENU screen appears.
2. Use the PAGE [UP] [DOWN] buttons and the function
buttons to select the setup menu that you want to edit.
Setup menu Explanation Page
SETUP MENU 1
OUTPUT Species the output destination of the sounds. p. 42
USB AUDIO Makes USB audio settings. p. 30
OPTION
Makes settings for the [PREVIEW] button, the
MIX IN jacks, and the display.
p. 44
CONTROL Assigns functions to the footswitch and pads. p. 45
SETUP MENU 2
MIDI Makes MIDI settings. p. 45
AUTO OFF Makes AUTO OFF settings. p. 10
INFO
Displays information about the TD-50 itself,
such as the program version.
p. 46
SETUP MENU 3
FACTORY RESET Returns the TD-50 to its factory settings. p. 46
3. Edit the settings of the menu that you selected.
Audio Output Assignments (OUTPUT)
Here’s how to assign the audio outputs from the MASTER OUT jacks,
DIRECT OUT jacks, and PHONES jacks.
MEMO
The output destination setting for USB audio (p. 30) is shared
with the output destination setting of the MASTER OUT jacks
and the DIRECT OUT jacks.
1. In the SETUP MENU 1 screen, press the [F1] (OUTPUT)
button.
2. Use the PAGE [UP] [DOWN] buttons and the function
buttons to select the audio output that you want to
assign.
1 page (PAD OUTPUT)
[F1] (MASTER) button
Specify each pad’s output assignments for the PHONES jacks and MASTER
OUT jacks (when OUTPUT ROUTING Master Out is set to “NORMAL”).
[F2] (DIRECT) button
Specify each pad’s output assignments for the DIRECT OUT 1–8 jacks and
MASTER OUT jacks (when OUTPUT ROUTING Master Out is set to “DIRECT”).
[F3] (MONITOR) button
Monitor the output volume of each jack.
2 page (OTHER OUTPUT)
[F1] (MASTER) button
Specify the ambience and MFX output assignments for the PHONES jacks
and MASTER OUT jacks (when OUTPUT ROUTING Master Out is set to
“NORMAL”).
[F2] (DIRECT) button
Specify the ambience and MFX output assignments for the DIRECT OUT 1–8
jacks and MASTER OUT jacks (when OUTPUT ROUTING Master Out is set to
“DIRECT”).
[F3] (MONITOR) button
Monitor the output volume of each jack.
* For more about the OUTPUT ROUTING Master Out parameter,
refer to “Data List” (PDF).
3. Strike a pad or use the cursor [
K
] [
J
] buttons to select the
pad or function that you want to edit.
Display Explanation
K KICK
S SNARE
1–4 TOM1–4
H HI-HAT
C CRASH1, 2
R RIDE
A AUX1–4
Display Explanation
AMB Ambience (p. 22)
MFX1–3 Multi-eect 1–3 (p. 23)
SONG Song (p. 14)
CLICK Click (p. 13) and song click track (p. 15) output
MIXIN Sound that is input to the MIX IN jack (p. 14)
USB IN MAIN, SUB
Sound that is input to the USB COMPUTER port
(p. 31)