Roland TD-50 - Using Set Lists

34
Utility Functions
Editing the steps of a set list
3. Press the [F5] (STEP EDIT) button.
The SETLIST STEP EDIT screen appears.
Set list number
Step number
Drum kit at this step
4. Use the cursor buttons to select each step, and use the [–]
[+] buttons or the dial to specify the drum kit at that step.
Button Explanation
[F4] (DELETE) button
Step at the cursor position is deleted, and
steps after this point are moved forward one
place.
[F5] (INSERT) button
The same kit is inserted at the cursor
position, and steps after this point are moved
backward one place.
MEMO
If the set list is empty, move the cursor to “END” and use the [–]
[+] buttons or the dial to specify a drum kit.
5. Press the [KIT] button to return to the SET LIST screen.
Using Set Lists
Selecting a set list
1. Press the [SET LIST] button to make it light.
The set list function turns on.
2. Press the [F1] (
K
SET LIST) button or [F2] (SET LIST
J
) button to
select the set list that you want to use.
Switching drum kits
1. Use the [–] [+] buttons or the dial to select drum kits in the
order of the specied steps.
2. When you’ve nished playing, press the [KIT] button or
the [EXIT] button to make the [SET LIST] button go dark.
The set list function turns o.
MEMO
5 You can assign the appropriate function to a footswitch or
pad, and use it to recall set lists or drum kits. For details, refer
to “Assigning Functions to Foot Switches or Pads (CONTROL)”
(p. 45).
5 If there are discrepancies between the volumes of each kit,
press the [MIXER] button and adjust the Kit Volume (overall
volume of the entire kit) (p. 22).