Roland TD-50 - Specifying the Input for USB Audio; Copying Settings (COPY)

31
Utility Functions
Specifying the Input for USB Audio
Here’s how to specify the USB audio input that is input to the USB
COMPUTER port.
This allows audio that is played back by the computer to be heard
from the TD-50.
1. In the SETUP MENU 1 screen (p. 42), press the [F2]
(USB AUDIO) button.
The USB AUDIO SETUP screen appears.
2. Use cursor buttons to select a parameter, and use the [–]
[+] buttons or the dial to edit the value.
Parameter Value Explanation
Input Gain -36–+12 dB
Adjusts the input level
This applies to the USB audio inputs
(Input MAIN, SUB) that are input from
the USB COMPUTER port.
Volume Select
Input MAIN, SUB
Species the knob that adjusts the input volume of USB
audio (Input MAIN, SUB).
OFF The volume is not adjusted by a knob.
SONG The [SONG] knob adjusts the volume.
CLICK The [CLICK] knob adjusts the volume.
MEMO
You can specify the output destination of the sound that is input
via USB audio (p. 42).
Copying Settings (COPY)
The TD-50 lets you copy various settings within the unit or to an SD
card.
You can also exchange settings between a copy-source and copy-
destination.
NOTE
When you execute a copy operation, the contents of the copy-
destination are overwritten. If the destination contains settings
that you want to keep, back them up to an SD card (p. 39).
1. Hold down the [SHIFT] button and press the [SD CARD]
button.
The COPY MENU screen appears.
2. Use the PAGE [UP] [DOWN] buttons and the function
buttons to select an item in the copy menu.
Copy menu Explanation
COPY MENU 1
KIT Copy a drum kit (p. 13).
PAD INST Copy a pad’s instrument (p. 19).
INST SET Copy multiple instruments as a set.
SET LIST Copy a set list (p. 33).
COPY MENU 2
VOLUME Copy the MIXER VOLUME (p. 22) settings.
PAN Copy the MIXER PAN (p. 22) settings.
AMBIENCE Copy the ambiance (p. 22) settings.
MFX Copy the multi-eect (p. 23) settings.
COPY MENU 3
TRIGGER Copy the trigger (p. 35) settings.
REC DATA
Copy recorded data (p. 17) to an SD card.
* The copy-source and copy-destination cannot
be exchanged.
3. Copy the settings according to the menu item that you
selected.
Example 1) Copying a drum kit (KIT)
1. In the COPY MENU 1 screen, press the [F1] (KIT) button.
The COPY KIT screen appears.
2. Press one of the [F1] (USER)–[F3] (SD CARD) buttons to
select a function.
Button Explanation
[F1] (USER) button
Copies from user memory. Only if the copy-source
is user, you can exchange the copy-source and
copy-destination.
[F2] (PRESET) button
Copies kits of preset memory. Choose this if you
want to return to the factory-set kit settings.
* User samples that are assigned to a factory-set
kit cannot be copied.
[F3] (SD CARD) button Copies kits from backup data saved on an SD card.