Roland TD-50 - Page 32

32
Utility Functions
3. Use cursor buttons to select the parameters, and use the
[–] [+] buttons or the dial to specify the copy settings.
USER, PRESET
Copy-source
Copy-destination
User sample icon
(shown only if a drum kit that uses
user samples (p. 27) is selected)
SD CARD
Copy-source
Copy-destination
Copy-source bank number
Include or don’t include user samples
User sample icon
* If you are copying backup data that does not include user samples, you
can’t select the “With User Sample” check box.
4. Press the [F5] (COPY) button.
By pressing the [F4] (EXCHANGE) button you can exchange user
memories (USER only).
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
5. Select “OK” and press the [ENTER] button.
The drum kit is copied.
Example 2) Copying multiple instruments as a set
(INST SET)
1. In the COPY MENU 1 screen (p. 31), press the [F3]
(INST SET) button.
The COPY PAD INST SET screen appears.
2. Press one of the [F1] (USER)–[F3] (SD CARD) buttons to
select a function.
Button Explanation
[F1] (USER) button
Copies from user memory. Only if the copy-source
is user, you can exchange the copy-source and
copy-destination.
[F2] (PRESET) button
Copies instruments of preset memory. Choose this
if you want to return to the factory-set kit settings.
* User samples that are assigned to a factory-set
kit cannot be copied.
[F3] (SD CARD) button
Copies instruments from backup data saved on an
SD card.
3. Use cursor buttons to select the parameters, and use the
[–] [+] buttons or the dial to specify the copy settings.
USER, PRESET
User sample icon
(shown only if a drum kit that uses
user samples (p. 27) is selected)
Instrument set to copy
Copied contents (Copy Target)
Copy-source
Copy-destination
SD CARD
Instrument set to copy
Copied contents (Copy Target)
Copy-source
Copy-destination
Copy-source bank number
Include or don’t include user samples
User sample icon
* If you are copying backup data that does not include user samples, you
can’t select the “With User Sample” check box.
Instrument set to copy
Value Explanation
KICK/SNR Copy KICK and SNARE.
TOMS 1–4 Copy TOM 1–4.
CYM SET Copy HI-HAT, CRASH 1, 2, and RIDE.
AUX 1–4 Copy AUX 1–4.
Copied contents (Copy Target)
Value Explanation
with Pad EQ/
Comp
All pad-related settings (such as instrument, V-EDIT,
volume, ambience send, and Pad EQ/Comp) are copied.
Inst/VEdit Only
Of the pad settings, settings other than Pad Eq/Comp
are copied, such as instrument settings (e.g., instrument,
V-EDIT), volume, and ambience send.
Pad EQ/Comp
Only
Of the pad settings, only the pad equalizer and pad
compressor settings (p. 23) are copied.