Roland TD-50 - Output Destination Setting Examples

43
Settings
4. Use the cursor [
H
] [
I
] buttons, [–] [+] buttons, or dial to
select the output destination.
MEMO
To return to the default values, press the [F4] (DEFAULT) button.
If in page 1 (PAD OUTPUT) you selected the [F2] (DIRECT)
button, pressing the [F4] (DEFAULT) button lets you select the
default values (factory-set state) or another output setting
(STEREO ALL) (supported starting with program version 1.05).
Use the cursor buttons to select “DEFAULT” if you want to return
to the default values (factory-set state) or "STEREO ALL" if you
want to select the other output setting; then press the [F5]
(RESET) button.
5. Press the [KIT] button to return to the DRUM KIT screen.
Output Destination Setting Examples
Here are some examples of output destination settings.
MEMO
The MASTER OUT jacks (XLR type) and DIRECT OUT jacks
(TRS phone type) are balanced. The MASTER OUT jacks
(TRS phone type) are unbalanced (p. 9).
Example 1) Default settings
As the chart below illustrates, the PHONES jacks and the MASTER
OUT jacks will output all sounds. Individual sounds are assigned to
DIRECT OUT 1-8 jacks for individual sound control with a PA system.
Jack Output setting Example destination
PHONES All Monitor headphones
MASTER OUT All Drum monitor
DIRECT OUT 1 KICK
PA (external mixer)
DIRECT OUT 2 SNARE
DIRECT OUT 3 HI-HAT
DIRECT OUT 4 RIDE
DIRECT OUT 5/6 TOM 1–4 (Stereo)
DIRECT OUT 7/8
CRASH 1, 2,
AUX 1–4 (Stereo)
Example 2) Sending the same audio for monitoring and PA
With these settings, the same sound will be output from the
PHONES jacks, the MASTER OUT jacks, and the DIRECT OUT 7/8
jacks.
The sound being monitored by the performer will be the same as
the sound sent to the PA system.
* The master compressor and master EQ eects are not applied to
DIRECT OUT.
Jack Output setting Example destination
PHONES All Monitor headphones
MASTER OUT All Drum monitor
DIRECT OUT 1 – –
DIRECT OUT 2 – –
DIRECT OUT 3 – –
DIRECT OUT 4 – –
DIRECT OUT 5/6 – –
DIRECT OUT 7/8 All PA (external mixer)
Example 3) Performing while listening to a guide
All sound is sent from the PHONES jacks for monitoring.
By outputting CLICK (the click and song click track output) and USB
IN SUB (the sound that is input to the USB COMPUTER port) only
from headphones, the performer alone can hear the guide sound
while they perform.
Jack Output setting Example destination
PHONES
All
CLICK and USB IN
SUB are output
only to PHONES
Monitor headphones
MASTER OUT
Output only
SONG and USB IN
MAIN
PA (external mixer)
DIRECT OUT 1 KICK
DIRECT OUT 2 SNARE
DIRECT OUT 3 HI-HAT
DIRECT OUT 4 RIDE
DIRECT OUT 5/6 TOM 1–4 (Stereo)
DIRECT OUT 7/8
CRASH 1, 2,
AUX 1–4 (Stereo)