Roland Texart XT-640 Setup Guide

4. Assembly and Ink Filling
29
w
When the screen on the left is displayed, select the desired
language, and then press
.
x
Press or to select the desired length
unit, and then press
.

Select the desired temperature unit in the same way, and
then press
.
Step 9: Ink Filling
1. Select the ink type.

Press or to select the ink type.
Ink type Colors used
SUBLIMATION3 4C
Cyan, magenta, yellow, and black
SUBLIMATION3 8C
Cyan, magenta, yellow, black, light cyan, light magenta, orange,
violet

Press .
w
Press or to select [YES], and then press
.
Selecting [NO] and pressing will start the procedure over
from step

.
x
Make sure the drain bottle is installed, and then press
.

When the screen on the left is displayed, remove the
right cover.
Press the part in the following gure until it clicks. Lightly pull the
cover in the direction indicated with
, and then remove the cover
by raising it in the direction indicated by
.
/'07.#0)7#)'
'0).+5*
.'0)6*70+6
OO+0%*
6'/270+6
%(
ޕޕ
5'.'%6+0-6;2'
57$.+/#6+10%
=;'5?ޓ01
57$.+/#6+10%
+056#..
&4#+0$166.'
12'0%18'44
Click!

Roland Texart XT-640 Specifications

General

Brand	Roland
Model	Texart XT-640
Category	Printer
Language	English